Replacing the charge roll
Order a new charge roll kit when toner fog or background shading appears on printed pages. See
Ordering supplies
for information on ordering a charge roll.
1
Turn the printer off and unplug the printer power cord.
2
Open the front doors and remove the print cartridge.
3
Pull the upper front door halfway down.
4
Locate the used charge roll above the area for the print cartridge.
5
Locate the label with an arrow on the right side of the housing. It is attached to the arm-like
tab.
6
Push the arm-like tab to the right to release the charge roll.
Replacing the charge roll
90
Tab