Solving Network Printing Problems; Solving Other Problems; Contacting Service - Lexmark T630 User's Reference Manual

Solving network printing problems

Problem
Job did not print or
incorrect characters
printed.

Solving other problems

Problem
I need to get updated
printer drivers or utilities.
I need to attach a serial
cable to the printer.
I cannot find the printer
escape codes.

Contacting service

When you call for printer service, be prepared to describe the problem you are experiencing or the
error message on the display.
You need to know your printer model type and serial number. Refer to the label on the back of the
printer near the power cord for this information. The serial number is also listed on the menu settings
page you can print from the Utilities Menu. See
information.
For service, contact the Lexmark support site for customer service at http://support.lexmark.com,
and report a description of the problem.
Solving network printing problems
Action
Verify that the Lexmark internal print server or external print server is
set up properly and the network cable is connected.
Note: For more details, refer to the drivers CD that shipped with your
printer.
For Novell users:
• Make sure the netware.drv file is dated October 24, 1994, or later.
• Make sure the NT (no tabs) flag is included in the capture statement.
For Macintosh users:
• The printer may need an optional internal print server to allow
Macintosh connection.
• Verify that the printer is set up correctly in Chooser.
Action
• Refer to the drivers CD that came with your printer. It contains printer
drivers and utilities.
• Visit the Lexmark Web site, www.lexmark.com, for the most current
printer drivers or utilities.
If your printer is configured with a serial port, or you have installed an
optional interface card, refer to the Setup Guide.
Refer to the Technical Reference available on the Lexmark Web site at
www.lexmark.com.
Printing the menu settings page
119
for more