Installation Steps - Planet ISW-504PT User Manual

3.1 Installation Steps

Step 1: Unpack the Industrial Fast Ethernet Switch.
Step 2: Check the DIN-Rail is screwed on the Industrial Fast Ethernet
Switch. (Please refer to DIN-Rail Mounting section for DIN-
Rail installation. If you want to wall mount the Industrial
Fast Ethernet Switch, then please refer to Wall Mount Plate
Mounting section for wall mount plate installation.
Step 3: To hang the Industrial Fast Ethernet Switch on the DIN-
Rail track or wall, please refer to the Mounting Installation
section.
Step 4: Power on the Industrial Fast Ethernet Switch. (Please refer
to the Wiring the Power Inputs section for power input) The
power LED on the Industrial Fast Ethernet Switch will light
up. Please refer to the LED Indicators section for meaning of
LED lights.
Step 5: Prepare the twisted-pair, straight through Category 5 cable
for Ethernet connection.
Step 6: Insert one side of Category 5 cables into the Industrial Fast
Ethernet Switch Ethernet port (RJ-45 port) and another side
of category 5 cables to the network devices' Ethernet port
(RJ-45 port), ex: Switch, PC or Server. The UTP port (RJ-45)
LED on the Industrial Fast Ethernet Switch will light up when
the cable connected with the network device. Please refer to
the LED Indicators section for LED light meaning.
Be sure the connected network devices support MDI/
MDI-X. If the network devices do not support MDI/MDI-
X, please use the crossover category 5 Cable to connect.
Note
Step 7: Insert fiber cable from the ISW-514PT / ISW-514PT15 / ISW-
514PTF to the fiber network. The optical port LED on the
Industrial Fast Ethernet Switch will light up when the cable
connected with network device. Please refer to the LED
Indicators section for LED light meaning.
Step 8: When all connections are set and the LEDs are light without
any issue mean that the installation is complete.
1