Firmware Upgrade; Pic.118 Upgrading Printer Firmware - idp SMART-30S User Manual

#define LMSC_S_CARDOUTSENSOR
#define LMSC_S_OUTDOORSENSOR
Laminator's Error Code
#define LMSC_E_HEATHDRLIFTUP
#define LMSC_E_HEATHDRLIFTDOWN
#define LMSC_E_CARDIN
#define LMSC_E_MOVE_LAMINATE
#define LMSC_E_FRONTCARDOUT
#define LMSC_E_REARCARDOUT
#define LMSC_E_ROTATE
#define LMSC_E_INIT
#define LMSC_E_EMPTYFILM
#define LMSC_E_NOFILM

4.3. Firmware upgrade

When you run the CardPrinterFirmware, you can see the pop-up window as the Pic. 120.
Device: Select the local printer that you want to upgrade.
Card Printer / Laminator: Select the device you want upgrade.
Device Version: Displays the current firmware version of selected printer.
Binary File: Click "Browse" button and select new firmware file to update.
Manual Update: It is used when you want to upgrade manually.
Update: Upgrades automatically. In generally, we recommend upgrading automatically.
Close: Exit.
Message : It displays information of upgrading.
0x0000000040000000
0x0000000080000000
0x0000000100000000
0x0000000400000000
0x0000001000000000
0x0000004000000000
0x0000010000000000
0x0000020000000000
0x0000040000000000
0x0000800000000000
0x0001000000000000
0x8000000000000000
Pic.120 Upgrading printer firmware
69
// Caught by card out sensor
// Caught by stacker open sensor
// Error while lifting up Heat-header
// Error while lifting down Heat-header
// Error while moving card in
// Error while moving to Laminate position.
// Error while front card out (printer side)
// Error while rear card out (stacker side)
// Error while rotating
// Error while initializing laminator
// Film remain count is 0.
// No film is installed, or cannot