Magnetic Stripe Encoding; General Operation; Pic.145 Printing Quality Trouble 4; Pic.146 Printing Quality Trouble 5 - idp SMART-30S User Manual

6.4.4. Not aligned color print.

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).
 Uneven or bad card surface.
Change the card.

The transfer
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 6.1.

Worn-out printer.
Please contact the local supplier.
6.4.5. Unplanned color print.
 Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card
(54mm x 86mm).

Uneven or bad card surface.
Change the card.

The transfer
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 6.1.
 Worn-out printer.
Please contact the local supplier.

6.5. Magnetic stripe encoding

6.5.1. Magnetic encoding error.
First of all, Please press left LED button to retry.

The magnetic head is contaminated with the dust and dirt.
Clean the magnetic head with the cleaning kit.
 The magnetic encoding data is not transmitted or the wrong data is transmitted.
Check the setting of the program and the driver and the magnetic encoding data you
transmitted.
 The card is not magnetic card, or inserting direction is wrong.
Change the card or the direction.

Bad magnetic stripes on the card.
Change the card.

6.6. General operation

6.6.1. Ribbon snapped during printing.
Open the top cover and take out the cartridge. After putting the snapped pieces on together,
install the cartridge again. Check the followings if this kind of problem occur frequently

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm).

Too high or low setting of the color density.
Please contact the local supplier. The color density default of your printer needs to be
changed.
roller or printing
roller or printing
84
roller is
Pic.148 Printing quality trouble 4
roller is
Pic.149 Printing quality trouble 5
.