Toyota KUN26L-P series Owner's Manual page 188

Discharged
battery
Negative
Booster
terminal
battery
("−" mark)
c. Connect the clamp of the negative
(black) jumper cable to the negative (–)
terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting points
are shown in the following illustrations:
Jumper
cable
40h027a
Connecting point for 2TR−FE engine
40h028
Connecting point for 1KD−FTV engine
40h029
Connecting point for 2KD−FTV engine
Do not connect the cable to or near
any part that moves when the engine
is cranked.
CAUTION
When making the connections, to
avoid serious injury, do not lean over
the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
181