Toyota KUN26L-P series Owner's Manual page 79

13H041
2. Install a locking clip near the tab of
the lap and shoulder belt by inserting
the lap and shoulder webbing through
the recesses of the locking clip. Buckle
the belt again. If the belt has any
slack, release the buckle and reinstall
the locking clip.
If your child restraint system does not
provide a locking clip, you can purchase
one at your Toyota dealer. (See "—Child
restraint system" on page 49.)
62
CAUTION
After inserting the tab, make sure
D
the tab and buckle are locked and
that the lap and shoulder portions
of the belt are not twisted.
Do not insert coins, clips, etc. in
D
the buckle as this may prevent you
from properly latching the tab and
buckle.
If the seat belt does not function
D
normally, it cannot protect your
child from death or serious injury.
Contact your Toyota
immediately. Do not install the child
restraint system on the seat until
the seat belt is fixed.
13H088
dealer
Push and pull the child restraint
D
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.