Toyota KUN26L-P series Owner's Manual page 76

CAUTION
After inserting the tab, make sure
D
the tab and buckle are locked and
that the lap and shoulder portions
of the belt are not twisted.
Do not insert coins, clips, etc. in
D
the buckle as this may prevent you
from properly latching the tab and
buckle.
If the seat belt does not function
D
normally, it cannot protect your
child from death or serious injury.
Contact your Toyota
immediately. Do not install the child
restraint system on the seat until
the seat belt is fixed.
dealer
Push and pull the child restraint
D
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
13H092
3. To remove the baby (infant) seat, press
the buckle release button and allow the
belt to retract completely. The belt will
move freely again and be ready to
work for an adult or older child passen-
ger.
CAUTION
Always remove the locking clip when
the child restraint system is not
installed.
59