Toyota KUN26L-P series Owner's Manual page 195

40h043
Remove the holding bracket only after re-
moving the padlock.
188
40h044
When storing the spare tire, put it in place
with the outer side of the wheel facing up
and hook the holding bracket as shown in
the illustration. After the tire goes half
way up, check that the suspended chain
is able to enter the tire hole, for proper
storage. Then secure the tire, taking care
that the tire goes straight up without
catching on the chain or any other part,
to prevent it from flying forward during a
collision or sudden braking.
Reattach the padlock after securing the
tire.
Check the tire from the side to see that
the tire is stored horizontally.
—Blocking the wheel
40h021
2. Block the wheel diagonally opposite
the flat tire to keep the vehicle from
rolling when it is jacked up.
When blocking the wheel, place a wheel
block in front of one of the front wheels
or behind one of the rear wheels.