Toyota KUN26L-P series Owner's Manual page 71

13H033
3. To remove the baby (infant) seat, press
the buckle release button.
54
13h016
(B) CHILD (CONVERTIBLE)
INSTALLATION
A child (convertible) seat must be used
in forward−facing or rear−facing posi-
tion depending on the age and size of
the child. When installing, follow the
manufacturer's instructions about the
appropriate age and size of the child as
well as directions for installing the
child restraint system.
13h070
SEAT
CAUTION
SINGLE−CAB MODELS:
D
Do not install a child restraint sys-
tem in the center position. This
seat position is not designed to
hold a child restraint system.
If used in the center position, de-
pending on its type, the child re-
straint system may interfere with
the proper usage of the driver's and
front passenger's seat belts. It may
also hamper your driving.