Toyota KUN26L-P series Owner's Manual page 75

13H073
CAUTION
Do not install a child restraint sys-
D
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in case of sud-
den braking or a collision.
If the driver's seat position does
D
not allow sufficient space for safe
installation, install the child re-
straint system on the rear right
seat.
58
13H085
1. Run the lap and shoulder belt through
or around the baby (infant) seat follow-
ing the instructions provided by its
manufacturer and insert the tab into
the buckle taking care not to twist the
belt. Keep the lap portion of the belt
tight.
13H041
2. Install a locking clip near the tab of
the lap and shoulder belt by inserting
the lap and shoulder webbing through
the recesses of the locking clip. Buckle
the belt again. If the belt has any
slack, release the buckle and reinstall
the locking clip.
If your child restraint system does not
provide a locking clip, you can purchase
one at your Toyota dealer. (See "—Child
restraint system" on page 49.)