Toyota KUN26L-P series Owner's Manual page 200

—Reinstalling wheel
ornament
40h032
10. Reinstall the wheel ornament.
Put the wheel ornament into position. And
press hand firmly on one side of wheel
ornament and then firmly tap the other
side around the edge of wheel ornament
with the heel of your hand to snap into
place.
CAUTION
Take due care in handling the orna-
ment to avoid unexpected personal
injury.
—After changing wheels
11. Check the air pressure of the re-
placed tire.
Adjust the air pressure to the specification
designated on page 261. If the pressure
is lower, drive slowly to the nearest ser-
vice station and fill to the correct pres-
sure.
Do not forget to reinstall the tire inflation
valve cap as dirt and moisture could get
into the valve core and possibly cause air
leakage. If the cap is missing, have a new
one put on as soon as possible.
12. Restore all the tools, jack and flat
tire securely.
As soon after changing wheels as pos-
sible, tighten the wheel nuts to the torque
specified on page 261 with a torque
wrench. Have a technician repair the flat
tire and replace the spare tire with it.
This is the same procedure for changing
or rotating your tires.
CAUTION
Before driving, make sure all the
tools, jack and flat tire are securely
in place in their storage location to
reduce the possibility of personal in-
jury during a collision or sudden
braking.
193