Changing A Custom Type <X> Name - Lexmark E360d Series User Manual

7
Press the arrow buttons until the size you want appears, and then press
The Paper Menu appears.
8
Press the arrow buttons until Custom Types appears, and then press
9
Press the arrow buttons until Custom Type <x> or another custom name appears, and then press
Submitting Changes appears, followed by Paper Menu.
10
Verify that the correct Paper Type is associated with the custom name.
Note: Plain Paper is the factory default Paper Type associated with all Custom Type <x> names and user-defined
custom names.
11
Press and release
Changing a Custom Type <x> name
If the printer is on a network, you can use the Embedded Web Server to define a name other than Custom Type <x>
for each of the custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display
the new name instead of Custom Type <x>.
To change a Custom Type <x> name:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the address in the
TCP/IP section.
2
Click Settings.
3
Click Paper Menu.
4
Click Custom Name.
5
Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size and Type
menus.
6
Click Submit.
7
Click Custom Types.
Custom Types appears, followed by your custom name.
8
Select a Paper Type setting from the pick list next to your custom name.
9
Click Submit.
until Ready appears.
Loading paper and specialty media
.
.
38
.