Installing Hardware Options; Installing A 250- Or 550-Sheet Drawer - Lexmark E360d Series User Manual
Lexmark printer user's guide
Hide thumbs
Also See for E360d Series:
- Service manual (180 pages) ,
- User manual (144 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
Installing hardware options
Installing a 250- or 550-sheet drawer
The printer supports one optional drawer; you can install a 250- or 550-sheet drawer.
CAUTION—SHOCK HAZARD: If you are installing an optional drawer after setting up the printer, then turn the
printer off and unplug the power cord from the wall outlet before continuing
1
Unpack the drawer, and then remove any packing material from the outside of the drawer.
2
Remove the tray from the support unit.
Support unit
1
2
Tray
3
Remove any packing material and tape from inside the tray.
4
Insert the tray into the support unit.
5
Place the drawer in the location chosen for the printer.
Additional printer setup
21
Advertisement
Table of Contents
