Verifying Printer Setup; Printing A Menu Settings Page; Printing A Network Setup Page - Lexmark E360d Series User Manual

3
From the Finder desktop, double-click the printer CD icon that automatically appears.
4
Double-click the Install icon.
5
Follow the instructions on the screen.
Using the World Wide Web
1
Go to the Lexmark Web site at www.lexmark.com.
2
From the Drivers & Downloads menu, click Driver Finder.
3
Select your printer, and then select your operating system.
4
Download the driver and install the printer software.

Verifying printer setup

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory
default settings. Once you select and save other settings from the menus, they replace the factory default settings
as user default settings. A user default setting remains in effect until you access the menu again, choose another
value, and save it. To restore the factory default settings, see "Restoring the factory default settings" on page 106.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Menu Settings Page appears, and then press
After the menu settings page prints, Ready appears.

Printing a network setup page

If the printer is attached to a network, print a network setup page to verify the network connection. This page also
provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Network Setup Page appears, and then press
After the network setup page prints, Ready appears.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.
.
.
Additional printer setup
24
.
.
.
.