Multiple-Language Pdfs Do Not Print; Job Takes Longer Than Expected To Print - Lexmark E360d Series User Manual

M
AKE SURE THE CORRECT PRINTER SOFTWARE IS INSTALLED
Verify that you installed the correct printer software for your printer model. Open the Software and
Documentation CD to check which software is installed. For more information, see "Installing printer software" on
page 23. Make sure the model number of the software matches the model number of your printer.
To verify that the printer software is the most current, check the Lexmark Web site at www.lexmark.com.
M
AKE SURE THE PRINTER IS CONNECTED TO THE NETWORK
Print a network setup page and check that the status shows Connected. If the status is Not Connected, check the
network cables, and then try printing the network setup page again. Contact your system support person to make
sure the network is functioning correctly.
Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.
M
AKE SURE YOU ARE USING A RECOMMENDED
For more information, visit the Lexmark Web site at www.lexmark.com.
M
AKE SURE PRINTER CABLES ARE SECURELY CONNECTED
Check the cable connections to the printer to make sure they are secure. For more information, see the setup
documentation that came with the printer.

Multiple-language PDFs do not print

The documents contain unavailable fonts.
1
Open the document you want to print in Adobe Acrobat.
2
Click the printer icon.
The Print dialog appears.
3
Select Print as image.
4
Click OK.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:
R
EDUCE THE COMPLEXITY OF THE PRINT JOB
Reduce the number and size of fonts, the number and complexity of images, and the number of pages in the job.
C P
HANGE THE AGE
1
From the printer control panel, press
2
Press the arrow buttons until Settings appears, and then press
3
Press the arrow buttons until General Settings appears, and then press
4
Press the arrow buttons until Print Recovery appears, and then press
P
ROTECT SETTING TO
Troubleshooting
USB,
PARALLEL
O
FF
.
112
, E
OR THERNET CABLE
.
.
.