Further Settings; Pedals Functions - Physis Piano H1 Reference Manual

5. FURTHER SETTINGS

5.1 PEDALS FUNCTIONS

Access the Pedals function under the FUNCTION menu (see par. 11.5, User Manual) to assign functions to pedals
connected to the rear panel (see also par. 4.3, User Manual).
The following functions can be assigned in System mode:
−
Prev Memory: select previous Memory. This function is suited for foot-switch pedals.
−
Next Memory: select next Memory. This function is suited for foot-switch pedals.
−
Master Volume: control the master volume. This function is suited for potentiometer (expression) pedals.
−
Audio Volume: control the volume level for audio player. This function is suited for potentiometer (expression) pedals.
−
Song Play/Stop: start/stop playing the selected song. This function is suited for foot-switch pedals.
−
Off: no function assigned.
In Fixed and Subject to sound mode, the following functions are available:
−
Off: no function assigned.
−
Sustain: Sustain effect (see also par. 4.4, User Manual). This function is suited for potentiometer (expression) pedals.
−
Sostenuto: Sostenuto effect (see also par. 4.4, User Manual). This function is suited for foot-switch pedals.
−
Soft: Soft effect (see also par. 4.4, User Manual).This function is suited for foot-switch pedals.
−
Expression: control the expression, or signal level. This function is suited for potentiometer (expression) pedals.
−
Efx Chain: activate / deactivate the effect selecte under the EFX block of the SOUND EDIT chain. (see par. 2.4 in this
manual). This function is suited for foot-switch pedals.
−
Amp Chain: activate / deactivate the AMP block of the SOUND EDIT chain (see par. 2.3 in this manual). This function
is suited for foot-switch pedals.
−
Hit Position: control the mallet's hit position for the φMALLET Sound family (see par. 2.1 in this manual). This function
is suited for potentiometer (expression) pedals.
−
Sliding Mute Level: control the damper's position, which determines the sound decay time of Clavy Sounds. (see par.
2.1). This function is suited for potentiometer (expression) pedals.
−
Pedal Wah: control the cutoff frequency of the Wah-Wah effect, (see also par. 2.4). This function is suited for
potentiometer (expression) pedals.
−
Rotary Brake: control the rotary effect's brake, that stops the speakers' rotation (see also par. 2.4 in this manual). This
function is suited for foot-switch pedals.
−
Rotary slow/fast: control the rotation speed speed of the rotary effect (see also par. 2.4 in this manual). This function is
suited for foot-switch pedals.
−
Vibrato speed: control the speed of the vibrato effect (see also par. 2.4 in this manual). This function is suited for
potentiometer (expression) pedals.
−
Tremolo speed: control the modulation speed of the tremolo effect (see also par. 2.4 in this manual). This function is
suited for potentiometer (expression) pedals.
−
Tremolo depth: control the modulation depth of the tremolo effect (see also par. 2.4 in this manual). This function is
suited for potentiometer (expression) pedals.
−
Amp Drive: control the gain of the AMP block preamplifier (see also par. 2.3 in this manual). This function is suited for
potentiometer (expression) pedals.
−
HDSE Pitch Up: pitch-bend towards higher pitches, for Sounds belonging to the Keyboard, Ensemble and Bass/Guit.
families. This function is suited for potentiometer (expression) pedals.
−
HDSE Pitch Down: pitch-bend towards lower pitches, for Sounds belonging to the Keyboard, Ensemble and
Bass/Guit. families. This function is suited for potentiometer (expression) pedals.
NB: The Sustain pedal of the three-pedal set, or the pedal connected to the [SUSTAIN] port can only be assigned to the
Sustain function, or no function at all.
Reference Manual – Further Settings
29