Reference Manual – Sound Edit Parameters
−
Attack (ms): sets the time (in millisecond) it takes for the
effect to start lowering the signal, when it goes beyond the
threshold. The higher the value, the longer it takes before
the effect lowers the signal.
−
Rel. (ms): sets the time (in milliseconds) it takes for the
effect to stop reducing the level, after the signal has
returned below the threshold.
2.3 AMPLIFIER Block
How to access: press [SOUND EDIT], select the AMP block.
Description: Amplifier effect parameters. This block simulates an amplifier
connected to the instrument; you can choose the type of amplifier and adjust
its characteristics.
−
Pre Amp Type: select the preamplifier type:
•
Tube: valve amp
•
Transistor: transistor amp
•
Hot Valve: an amp with more performant valves than the Tube
−
Pre-Amp Drive: adjusts the pre-amplifier's gain.
−
Hi Damp: sets the cutoff frequency of the pre-amplifier's low-pass filter.
−
Power Amp Type: select the type of power amplifier,
•
Sweet: a sweet combo, with lighter sounds
•
Vintage: a sharp-edged combo
•
Punch: an amp with a rich sound
•
Loud: loud combo with a strong presence and clean tone
•
Hot: this amp highlights the middle frequencies
•
Overbass: this amp highlights mid-low frequencies
−
Power Amp Character: adjust the amp's character.
−
Cabinet Color: Adjust the cabinet timbre.
−
Cabinet Type: sets the cabinet type,
•
DI Box: direct injection box
•
1 cone: one-cone cabinet
•
2 cones: two-cone cabinet
•
4 cones: four-cone cabinet
−
Level: sets the output level of the Amplifier block.
2.4 EFX Block
How to access: press [SOUND EDIT], select the EFX block.
Description: parameters of the echo or modulation effects. Only one effect can be used at a time; effects can be select
thtough the Efx parameter.
DELAY
The (echo) delay is an effect that generates separate repetition of the signal.
Adding a feedback of the (delayed) output signal generates several
repetions, each with a lower volume than the previous one.
−
Type: select the type of echo,
•
Stereo: delays are stereo, so with a stereo Sound also the
repetitions keep the stereo panorama.
•
Mono: the delays are always mono, regardless of the currently
selected sound (stereo or mono).
Signal
Level
Input Signal
Attack
16
Output Signal
Rel.
Thres.
Time