Customizing The Multitouch Panel; Manual Settings - Physis Piano V100 User Manual

Table of Contents

User Manual – Customizing the multitouch panel

5. CUSTOMIZING THE MULTITOUCH PANEL

To ensure the best comfort, convenience and aesthetic appeal, the multi-touch panel can be configured. The colours of the

Key Touch can be changed, the lights turned on or off, and the display background and colours can be selected.

To access these options press the [VIEW] Key Touch. The display will show the configuration panel:

First select a field by placing the cursor on it using the [ ] or [ ] Key Touch, then select an option using [+] and [-].

To set Skin, Back Colour and Active Colour, use the Key Touch [ ] or [ ].

The parameters set:

ZONE 1: the [VOLUME] leds mode.

ZONE 2: the [φPIANO], [φE.PIANO] and [φMALLET] leds mode.

ZONE 3: the [KEYBOARD], [ENSEMBLE], [BASS GUIT.] and [MEMORY ] leds mode.

ZONE 4: the [F1], [F2], [F3], [F4], [+ ı ı ı -], [EXIT], [ENTER] and display leds mode.

ZONE 5: the [EFFECT ], [REVERB ], [EQ ] and [MIXER] led mode.

ZONE 6: the [SOUND EDIT], [FUNCTION,[SONG/DEMO] and [VIEW] leds mode.

To place the cursor on a ZONE, use the [ ] o [ ] Key Touch.

The Key Touch can be set in the following modes:

on: the Key Touch is active and the led light is on.

off: the Key Touch is inactive and the led light is off.

auto: the Key Touch is active but the led light is off. When first pressed, the light turns on. Pressing the Key Touch

a second time will activate the corresponding function. After 5 seconds, the led light is turned off again.

NB.

•

While in the VIEW function, the Key Touch belonging to ZONEs set as "off" will blink.

•

To allow the user to change settings, the [VIEW] Key Touch always remains in "auto" mode when ZONE 6 is set as

"off".

Skin: the display background.

Back Colour: the colour of a deactivated/not pressed Key Touch. (for example, sound families which have not been

selected)

Active Colour: the colour of a pressed/activated Key Touch (for example, the currently selected Sound family).

Panel Bright: Key Touch brightness.

Display Bright: display brightness.

Press [EXIT] to return to the main Sound page and save the current settings.

EN - 14

Table of Contents