How To Set Up The Printer For Network Printing; Windows - Lexmark E230 User Reference Manual

How to set up the printer for network printing

After you have assigned and verified the TCP/IP settings (see
page 95), you are ready to install the printer drivers on each network computer.

Windows

In Windows environments, network printers can be configured for direct printing or shared printing.
Both network printing methods require the installation of a printer driver and the creation of a network
printer port.
Supported printer drivers
• Windows system printer driver
• Lexmark custom printer driver
System drivers are built into Windows operating systems. Custom drivers are available on the drivers
CD.
Updated system and custom drivers are available on our Lexmark Web site at www.lexmark.com.
Supported network printer ports
• Microsoft IP port—Windows NT 4.0, Windows 2000, Windows XP, and Windows Server 2003
• Lexmark network port—Windows 95/98/Me, Windows NT 4.0, Windows 2000, Windows XP,
and Windows Server 2003
For basic printer functionality, you can install a system printer driver and use a system network
printer port, such as an LPR or a Standard TCP/IP port. The system printer driver and port let you
maintain a consistent user interface for use with all the printers on your network. However, using a
custom printer driver and network port provides enhanced functionality, such as printer status alerts.
Follow the steps for your printing configuration and operating system to configure your network
printer:
Printing configuration
Direct
Printer is connected directly to the network using a network cable,
such as Ethernet.
Printer drivers are typically installed on each network computer.
Shared
Printer is connected to one of the computers on the network using a
local cable, such as USB.
Printer drivers are installed on the computer attached to the printer.
During driver installation, the printer is set up to be "shared" so that
other network computers can print to it.
Software and network tasks
96
"How to configure for TCP/IP" on
Operating system
Windows 95/98/Me,
Windows NT 4.0,
Windows 2000,
Windows XP, or
Windows Server 2003
Windows NT 4.0,
Windows 2000,
Windows XP, or
Windows Server 2003
Go to page...
97
97