Lexmark E230 User Reference Manual page 98

Step 1: Install a custom printer driver
1
Insert the drivers CD.
If the CD does not auto launch, click Start
dialog box.
2
Click Install Software.
3
Click Printer and Software.
4
Click Agree to accept the license agreement.
5
Select Suggested, and then click Next.
6
Select Local Attached, and then click Next.
7
Follow the instructions on your screen to complete installing the drivers.
8
Print a test page to verify printer installation (see
Step 2: Share the printer on the network
1
Click Start
2
Select the printer you just created.
3
Click File Sharing.
4
Check the Shared check box, and then enter a name in the Shared Name text box.
5
In the Alternate Drivers section, select the operating systems of all the network clients that
will print to the printer.
6
Click OK.
Note: If you are missing files, you may be prompted to provide the server operating
system CD.
7
Check the following to make sure the printer was successfully shared.
• The printer object in the Printers folder now has a shared indicator. For example, in
Windows NT 4.0, a hand appears under the printer object.
• Browse Network Neighborhood. Find the host name of the server and look for the shared
name you assigned to the printer.
Step 3: Install the printer driver (or subset) on network clients
Using the point and print method
Note: This method is usually the best use of system resources. The server handles driver
modifications and the print job processing. This lets network clients return to
programs much faster.
Settings Printers.
Software and network tasks
Run, and then type D:\Setup.exe in the Run
"How to print a test page" on page
98
94).