Operator panel codes
Below are explanations of what the primary light sequences, or codes, and secondary error codes
mean and what you can do to clear them.
Primary codes
Ready / Power Saver
Light sequence:
•
Ready—On
What this light sequence means:
•
The printer is ready to receive and process data.
•
The printer is in Power Saver mode.
What you can do:
•
Send a print job.
•
Press Continue
list of current printer settings.
•
Press and hold Cancel
Note: If you want to change the Power Saver setting, it
to print the menu settings pages for a
to reset the printer.
can only be set from the Local Printer Setup Utility
(see
"Using the Local Printer Setup Utility" on
page
103).
Using the operator panel
57