Lexmark E230 User Reference Manual page 117

Problem / Question
I want to manually
duplex card stock, but
I'm having trouble
getting it to feed.
Paper stacks poorly in
the output bin.
Dust is gathering on the
paper tray when it is
extended.
The paper tray is getting
bumped and pushed out
the front of the printer
when it is extended.
Solution / Answer
The problem is that when the printer tries to manually duplex a print job, it always
prints side 2 from Tray 1. However, Tray 1 does not support card stock.
To achieve the desired effect, you have to send both pages of the print job as
separate jobs. After the first page has printed, reload the card stock in the manual
feeder. Load the card stock in the feeder with the already-printed side down, with the
top of the sheet first.
Extend the
paper support
on the output
bin.
Attach the dust cover to the back of the printer. This protects the paper tray from the
environment as well as keep the tray from being knocked out of position while it is
extended.
See Attaching the dust cover
Troubleshooting
for information about attaching the dust cover.
117