Lexmark E230 User Reference Manual page 120

Symptom
Uneven print density
ABCDE
ABCDE
ABCDE
Ghost Images
Uneven printing
DE
DE
DE
(Print only appears on one side of
the page.)
Incorrect margins
Skewed print
(Print is inappropriately slanted.)
*
To replace the fuser, call a service technician.
†
This setting can be changed using the Local Printer Setup Utility. See
Utility" on page 103 for more information.
Cause
• The toner cartridge is defective.
• The Form Type setting in the
printer driver is set incorrectly.
• Toner level is low in the toner
cartridge.
• The toner cartridge is not
properly installed.
The Form Size setting in the
printer driver is different than the
size paper that is loaded in the
tray. For example, you inserted A4
size paper into the selected tray
but did not set the Form Size to
A4.
• The guides in the selected tray
are not in the correct position for
the paper size loaded in the tray.
• The manual feeder's guides are
not in the correct position for the
paper size loaded in the feeder.
Troubleshooting
120
Solution
• Replace the toner cartridge.
• Make sure the Form Type
setting is correct for the paper or
specialty media you are using.
• Replace the toner cartridge.
• Remove and then reinsert the
toner cartridge.
Set the Form Size to A4.
• Move the guides in the tray so
that they are snug against the
sides of the paper.
• Move the manual feeder's
guides so that they are snug
against the sides of the paper.
"Using the Local Printer Setup