Change invalid toner cartridge
Light sequence:
•
Toner Low/Replace PC Kit—On
•
Error—Blink
What this light sequence means:
The toner cartridge you are using was not designed for your printer.
What you can do:
Install a toner cartridge made for your printer (see
do I need and how do I order them?" on page
Programming engine code / Programming system code
Light sequence:
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Load Paper—On
What this light sequence means:
New code is being programmed into the engine or firmware code
flash.
What you can do:
Wait for the message to clear. When the printer has finished
programming the code, it performs a soft reset.
"What supplies
105).
Using the operator panel
66