Replacement Of The Steering Axes/Counterweights; Replacement Part List - SCAN DSA 5 Instructions For Installation And Use Manual

Replacement of the steering axes/counterweights

We recommend that this be done by the authorized SCAN-dealer. It is done in the following way:
1. Swing out the door or dismount it (it is only necessary to dismount the door when replacing the
left counterweight).
See under "Cleaning the glass panel", point 1-4 and under "Dismounting/mounting of the
door). THE LOCK OF THE CURRENT STEERING AXIS MUST NOT BE UNLOCKED
DURING THE WORK!
2. Turn the lower screw in the steering axis clockwise with a 2 mm key.
3. Raise the steering axis with the counterweight, lift off the counterweight and take it out
(diagonally, downwards).
4. Mounting is done in the reverse order. Tighten the lower screw of the steering axis.

Replacement part list

Caution: Use only original DSA 5 replacement parts. Do not use substitute materials.
Replacement part
Glass panel for the door
Packet of ceramic gasket for door/glass
Upper baffle plate
Lower baffle plate
Hearth stone back left
Hearth stone back right
Hearth stone front left
Hearth stone front right
Fire brick for firebox left side
Fire brick for firebox right side
Fire brick for firebox back wall
Part #
57705011
55999000 705
54705000 091
54705000 0911
53999751 1
53999751 2
53999752 1
53999752 2
53999753 1
53999753 2
53999753 3
21