Matrix U7xi Owner's Manual page 15

ASSEMBLY STEP 4
AC2
C21
Z13
P02
P11
Z12
Z11
WHITE HARDWARE BAG CONTENTS :
Z11 BUTTON HEAD BOLT(M8x25L)
Z12 SPRING WASHER
Z13 BUTTON HEAD BOLT(M5x10L)
Open WHITE HARDWARE BAG.
A
Carefully pull the CONSOLE CABLE through
B
the CONSOLE MAST using the twist tie
located inside the CONSOLE MAST.
Attach CONSOLE MAST to MAIN FRAME
C
using PRE-INSTALLED BOLTS AND
WASHERS.
Slide WAVY WASHER (L) over CRANK
D
followed by PEDAL ARM as shown. Rest
PEDAL ARM WHEEL on GUIDE RAIL.
Attach the PEDAL ARM to the CRANK using
E
1 FLAT WASHER (K), 1 SPRING WASHER
(B) and 1 BOLT (M).
Repeat steps D–E on the opposite side of
F
the bike.
4
4
2
15