Conference Calls - Toshiba DP5000 Series Quick Reference Manual

Conference Calls

1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
conferenced.
Note
answer, press the flashing line button to return to the original call.
4. Repeat Steps 1~3 to add more lines. You can conference up to
eight parties.
To transfer conference control
Note
hangs up, control transfers to the first internal station added to the
conference. If no internal stations are in the conference, the call
disconnects.
1. Perform Steps 1 and 2 above to add the line to which you wish
to transfer conference control.
2. Announce the call and hang up to transfer the call. This station
is now the conference "master" with the ability to add or delete
parties.
To hold a conference call
If you are the "master" conference controller, press
(or twice for Executive Hold) to place the conference call on
hold.
The conference continues and you can join at any time
without giving up "master" abilities. Music-on-hold is
suppressed in this mode.
To conference two outside Lines
1. While talking on an outside call, press
2. Access an outside line.
3. After the party answers, press
Note
answer, press the flashing line button to return to the original call.
Strata CIX DP5000-series Telephone Quick Ref Guide Vol 2 05/09
If you receive a busy tone or if the station does not
When the person who initiates the conference (master)
If you receive a busy tone or if the station does not
.
twice and hang up.
. All parties are
.
once
11