Conference Calls - Toshiba 3000 series Quick Reference Manual

Conference Calls

1. While on a call, press
2. Call another station or outside line.
3. When the called party answers, press
there's no answer, press
original connection. All parties are conferenced.
4. Repeat the above steps to add more lines. You can conference
up to eight parties.
Note
(master) hangs up, control transfers to the first internal
station added to the conference. If no internal stations are in
the conference, the call disconnects.
³ To transfer conference control
1. Do steps 1 and 2 above to add the line to which you wish to
transfer conference control.
2. Announce the call and hang up to transfer the call. This station
is now the conference "master" with the ability to add or delete
parties.
³ To hold a conference call
³
If you are the "master" conference controller, press
(or twice for Executive Hold) to place the conference call on
hold.
The conference continues and you can join at any time without
giving up "master" abilities. Music-on-hold is suppressed in
this mode.
³ To delete the last member added to a conference
³
While a call is in progress, press the
³ To conference two outside Lines
1. While talking on an outside call, press
2. Access an outside line.
3. After the party answers, press
4. If you receive a busy tone or if the station does not answer,
press the flashing button to return to the original call.
5. Press
Note
if it is not provided, the lines must be supervised to
disconnect.
6. To supervise a tandem call, press the extension button. If the
parties have finished, hang up or if the parties are still talking,
press
Strata CTX DKT/IPT Telephone Quick Reference Guide 06/04
When the person who initiates the conference
8sU…
and hang-up.
Most phone companies provide auto disconnect, but
8sU…
and hang-up.
8sU…
.
8sU…
again to return to the
8sU…
8sU…
. If it's busy or
8hpry
button.
8sU…
.
.
C‚yq
once
5