Mic/Mute Button; One Touch - Toshiba DP5000 Series Quick Reference Manual

Hold
1. To place a call on Hold, press the
2. To return to the held call, press the held line's button.
If you do not return to the held call, it rings back to your phone.
If you are busy on another call, you hear two tone bursts. If the
held party hangs up, the call is released.
To place a call on Exclusive Hold
While on a call, press
Exclusive Hold; no one else will be able to access that line.
To place a call on Automatic Hold
While on a call, press another extension button to receive/
originate a new call. You can switch between calls without
having to press
Make sure this feature is programmed on your system; if not,
existing calls will drop.

Mic/Mute Button

Mute on the IP5000-series telephones mutes not only the microphone
but also the handset microphone as well. The MIC button on the
telephones toggles between Mic and Mute. When Mic button is lit,
handsfree communication is supported, when
is off, Mute is enabled.
During a handsfree conversation, press the Mic key, the red
indicator will turn off; the microphone and handset are
muted.
Press the Mic key again to resume hands free communication,
the red indicator will turn on.

One Touch

To store a number on the One Touch button
1. Dial
2. Press a
3. Enter the number to be stored.
4. Press the
Note
Programmable Feature Button.
Paging
To make an All Call Page
1. With the handset off-hook, press
all phones in the All Call Page Group, and may page external
speakers (depends on programming).
2. Make your announcement, then hang up.
12
Strata CIX DP5000-series Telephone Quick Ref Guide Vol 2 05/09
#9876
.
One Touch
One Touch
One Touch buttons must be programmed on a
twice. This places the call on
.
button.
button again.
All Call Page
button.
is pressed and light
. This pages