Care And Maintenance - Videocon SPRING-WM VSP70LPW-SFK Service Manual

5. OPERATING INSTRUCTION

5-3. CARE AND MAINTENANCE

BE SURE TO REMOVE THE POWER PLUG FROM MAIN POWER SUPPLY BEFORE CLEANING THE MACHINE.
1. Pull out the lint filter from the lock, use fingers to press
and pull out at the part of the lint filter's side
2. Rinse the dirt from filter with clean water.
3. Set back to the original position. Insert the bottom first
as shown, press filter down and lock the upper lock as shown.
Cleaning the Wash Tub
1. After washing is complete, fill fresh water above the level of Pulsator,
without adding clothes.
2. Run the machine for 1 ~ 2 minutes and then turn the Cycle Selector knob
to "DRAIN" position when Pulsator is still rotating.
3. When water is completely drained out, turn the Cycle Selector knob
to "WASH/RINSE"
4. Finally turn OFF the machine.
position.
11