Table of Contents
Advertisement
a
1
b
EXHAUST PIPE AND MUFFLER
INSTALLATION
1. Install:
• Exhaust pipe 1 (temporarily)
NOTE:
Install the exhaust pipe to the brackets on the
frame, making sure to position it as far rearward as
possible, and then temporarily tighten the exhaust
pipe bolts.
1
2. Install:
• Exhaust pipe joint gasket
• Exhaust pipe joint
• Exhaust pipe band
NOTE:
• After installing the exhaust pipe joints, fit the
exhaust pipe into them.
• Temporarily tighten the exhaust pipe band bolts;
do not torque them at this point.
3. Install:
• Muffler band 1
• Muffler
NOTE:
• Align the projection a on the muffler band with
the slot b on the muffler.
• Temporarily tighten the muffler band bolt and
muffler bolts; do not torque them at this point.
4. Tighten:
• Exhaust pipe band bolts
5. Tighten:
• Muffler bolts
NOTE:
First tighten the bolts on the rear side of the muffler,
and then tighten the bolts on the front side.
5-7
ENG
New
Exhaust pipe band bolt:
9 Nm (0.9 m · kg, 6.5 ft · lb)
Muffler bolt:
23 Nm (2.3 m · kg, 17 ft · lb)
Advertisement
Table of Contents
Troubleshooting
