Removal; Inspection - Yamaha FX10X 2008 Service Manual

DRIVE CHAIN

REMOVAL

1. Remove:
• Reverse driven gear 1
1
NOTE:
While holding the front axle assembly with spanner
wrench 2, loosen the reverse driven gear bolt.
2

INSPECTION

1. Inspect:
• Drive chain cover
Cracks/damage → Replace.
• Shift fork
Pitting/wear/damage → Replace.
• Oil seals
Wear/damage → Replace.
• Bearings
Pitting/damage → Replace.
2. Inspect:
• Drive sprocket
• Forward driven sprocket
• Reverse drive gear
• Counter gear
• Journal
• Chain tensioner
Pitting/wear/damage → Replace the defective
part(s).
• Reverse driven gear
• Reverse gear dog
Wear/damage → Replace the reverse driven
gear assembly.
• Spring
Damage → Replace the reverse driven gear
assembly.
• Drive chain
Wear/damage → Replace.
Shift → Clean or replace.
• Shift lever assembly
Wear/damage
• Bearings
Pitting/damage → Replace.
For the bearing replacement and drive chain
inspection,
MODEL".
4-25
POWR
TR
refer to "WITHOUT REVERSE