Installation - Yamaha FX10X 2008 Service Manual

É
Ã
C
4
Ã
C
È
É
Ë
3
Ã
C
1
Ã
C
2
4-21
DRIVE CHAIN

INSTALLATION

1. During installation, pay attention to the follow-
ing.
È Make sure that the bearing seals face towards the
drive chain as shown.
É Properly install the rubber seal onto the drive chain
cover, making sure that there are no gaps.
Be sure to install the collars in their original
C C C C
1 2 3 4
positions, otherwise the brake disc and sec-
ondary shaft will stick.
Ë 0.2 ~ 0.7 mm (0.008 ~ 0.028 in)
: ESSO beacon 325 grease or Aeroshell grease
#7A
For the secondary shaft and drive chain cover
installation, refer to "SECONDARY SHAFT".
2. Fill:
• Drive chain oil
Refer to "DRIVE CHAIN" in CHAPTER 2.
3. Adjust:
• Drive chain slack
Refer to "DRIVE CHAIN" in CHAPTER 2.
POWR
TR