Table of Contents
Advertisement
2) If the telephone must be secured against thefts or unauthorized removal, drill a third hole
as shown on the wall mounting layout.
3) Check the LAN or/and Power connection.
4) Align the 2 slots at the base of the HD2000IP in front of the 2 screws and pull down.
5) If needed, install the third screw though the hole located above the telephone (see the
page
6) and hide it with the foam plug.
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HD2000 and is the answer not in the manual?
Questions and answers