Table of Contents
Advertisement
8. CONFIGURATION GUIDE
8.1. Configuring HD2000IP using Web Browser
HD2000IP has embedded Web server and HTML pages that allow users to configure the
HD2000IP through an easy-to-use Web browser interface such as Microsoft's Internet
Explorer or Netscape browser. Below is a screen shot of the HD2000IP configuration page:
8.1.1. Get the IP address of the HD2000IP:
Connect the HD2000IP to a network via standard Ethernet cable, default the HD2000IP is in
DHCP mode.
If it is the HD2000IP with keypad, use the voice menu to get the IP address of the HD2000IP
(see the 7.1 get familiar with voice menu)
If you have the HD2000IP urgence, use a standard network protocol analyzer (for e.g.
Wireshark) to check the IP address allocated to the base unit by the DHCP server.
You can also contact with your administrator to get the IP address allocated to HD2000IP by
DHCP server.
8.1.2. Accessing the Web Configuration
The HD2000IP configuration page can be accessed via your web browser by entering the
WAN IP address: http://yourip's
Be sure that your PC is connected to the same VLan with the HD2000IP.
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HD2000 and is the answer not in the manual?
Questions and answers