Depaepe Telecom HD2000 User Manual page 23

BASIC OPTIONS SETTING
Options
Time Zone
NTP server
Daylight
Savings Time
Meaning
This parameter controls the date/time display according to the
specified time zone.
URI or IP address of the NTP (Network Time Protocol) server.
Used by the phone to synchronize the date and time.
This parameter controls time displayed in daylight savings time.
If set to "Yes", then the displayed time will be 1 hour ahead of
normal time.
The "Optional Rule" is configured to automatically adjust the
Daylight Savings Time (DST) based on the rule set in this field.
Rule Syntax:
• start-time; end-time; saving
• Both start-time and end-time have the same syntax: month,
day, weekday, hour, minute
• month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
• day: [+|-]1,2,3,..,31
• weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means
the daylight saving rule is not based on week days but based on
the day of the month.
• hour: hour (0-23), minute: minute (0-59)
If "weekday" is 0, it means the date to start or end daylight
saving is at exactly the given date. In that case, the "day" value
must not be negative. If "weekday" is not zero and "day" is
positive, then the daylight saving starts on the first "day" the
iteration of the weekday (e.g.: 1st Sunday, 3rd Tuesday etc). If
"weekday" is not zero and "day" is negative, then the daylight
saving starts on
23