Table of Contents
Advertisement
16
. Initializing and formatting the diskAshur PRO SSD after a complete reset
A complete reset of the diskAshur PRO SSD will erase all information and partition settings. You will need to initialize and
format the diskAshur PRO SSD.
To initialize your diskAshur PRO SSD, do the following:
1. After a complete reset, attach the diskAshur PRO SSD to the computer.
2. Press
UNLOCK
+ 9 buttons. The LED will change to Solid
3. Enter the new Admin PIN and press
flash 3 short blinks of the
GREEN.
4. Re-enter the Admin PIN and press the
LED will be Solid for 3 seconds.
5. LED will then turn
BLUE
LOCK
key is pressed, will return the drive to a standby state.
6. The Admin PIN is now set and will allow access to the drive or the Admin
features.
7. To
UNLOCK
the drive, enter the new PIN and press UNLOCK.
Windows 7
and earlier: Right-click My Computer, and then click Manage from
8.
the Windows desktop.
Windows
8: Right click left corner of desktop and select Disk Management.
9. In the Computer Manage window, click Disk Management. In the Disk Management window, the diskAshur PRO SSD
is recognized as an unknown device that is uninitialized and unallocated.
Note: If the Initialize Disk Wizard window opens, click Cancel.
UNLOCK
key. If accepted the LED will
GREEN
LED, then return to Solid
UNLOCK
key. If accepted the
and remain in Admin mode for 30 seconds or if the
www.istorage-uk.com
BLUE
/ Blinking GREEN.
BLUE
and Blinking
GREEN
#13
Hide quick links:
Advertisement
Table of Contents
