Connecting Your Diskashur Dt - iStorage diskAshur DT2 User Manual

2. Connecting your diskAshur DT

Be sure to read the following information before you begin to use the diskAshur DT
Attention:
You may damage the drive if you use a cable not included with the diskAshur DT
1. Ensure that the power switch on the back of the diskAshur DT
2. Connect the diskAshur DT
3. Attach the USB cable to the diskAshur DT
4. Turn the power switch on the back of the diskAshur DT
5. The LED indicator light should turn RED, indicating that the drive is now ready to use.
#6
2
Use only the cables provided with your diskAshur DT
to a power outlet using the included AC Adapter.
2
2
DC 12V
USB 3.1
www.istorage-uk.com
.
2
.
2
is in the OFF position.
2
drive and to an available USB port on your computer.
to the ON position.
2
ON
.
2
OFF