Global Patches/Options: Midi Learn And Dst Edit - Lexicon MPX G2 User Manual

Ten global patch assignments are available which allow you to assign an
external controller to the MPX G2 Post Mix or Send and Post Level controls, or
to individually control any one of the MPX G2 Effect Mix or Level controls. Global
patches override, but do not clear, program patches with the same parameter
Destination.
From the Global Patches screen, press > to display the following screen.
Options indicators for both the
Src and Dst parameters
Global Src:
# 1 Dst: -----------
Assign a Global Patch
number (1-10).
Use the < and > buttons to select one of the display fields shown above. Use
the knob to assign a source, a destination parameter and a patch number.
When you've completed your selections, press System to return to the main
System menu.
Options: MIDI Learn and Dst Edit
When Global Source is selected, pressing Options accesses a MIDI Learn
function which automatically assigns any connected MIDI controller as the
Source as soon as the controller is moved. Once you have moved the controller,
press Options again to return to the Global Patches display.
When Dst is selected, pressing Options accesses a set of controls which allow
you to edit all assigned Destinations.
Unchanged: Selections made in Options take effect immediately on
returning to the Global Patches menu. This selection
allows you to enter and exit Options without effecting any
change.
Clear All: This control allows you clear all Destination assignments.
Mix Params: This control allows you to assign Mix parameters to all
Destinations.
Level Params: This control allows you to assign Level parameters to all
Destinations.
Press Options again to return to the Global Patches display.
Select any patch source from the avail-
able source list shown here.
None
Select the parameter you want to con-
trol with the displayed Global Src.
System Controls
Global Patches
With Global Src selected, press
Options to access MIDI Learn.
With Dst selected, press Options to
select Dst editing parameters.
JamMan Note
Clear Loop
Layer
Replace
Delay
Start/Stop
Controls for the JamMan Delay ef-
fect can also be assigned as Global
Patch Destinations.
5-15