Selecting A Source And Destination - Lexicon MPX G2 User Manual

MPX G2 User Guide
Selecting a Source
and Destination
Patch Sources
All Sources are the same in the
sense that each generates an out-
put value in the range of 0-127. The
output value is used to increase or
decrease the setting of a Destina-
tion parameter value. Some gener-
ate values continuously (they're al-
ways "on" ); some generate output
based on the position of a particular
external MIDI controller, or a
footpedal, or footswitch. Some
Sources generate output based on
aspects of physical performance
such as how loud, how fast, or how
hard you play. The MPX G2 allows
you to choose a Source for each
Destination from the following list.
Patch Sources
Ctls: Off
MIDI:CC 1
On
•
Knob
•
Puls1
•
Tri1
CC31
LFO1
Sine1
CC33
Cos1
•
Puls2
•
Tri2
•
LFO2
Sine2
CC119
Cos2
Bend
Rand
Touch
Env
Vel
InLvl
Last Note
RnLvl
Low Note
A/B
High Note
ATrg
Tempo
BTrg
Cmnds
ABTrg
Gate
Pedal
Trig
Tog 1-3
LGate
Sw 1-3
Tsw
Toe
Sources are displayed with the prefix
Ctls or MIDI. Ctls are internal
MPX G2 controllers and rear panel
switches and pedal inputs. MIDI
sources are all designated MIDI con-
trollers.
4-2
From the patch number display, press > to step to the patch Source and
Destination assignment screen. The display will show the current Source
assignment on the top line, and the current Destination assignment on the
bottom line. One of the assignments will be flashing to let you know which is
selected for adjustment. Use
assignment field, and the knob to select a Source from the available list.
Src: Ctls
< > Dst: RvbDecay
From the same screen, use the < and > buttons to select the Destination
assignment field, and the knob to select a Destination from the list of parameters
of the currently loaded program.
Src: Ctls
< > Dst: RvbDecay
For most applications, that's all there is to setting up a patch. The default patch
values will set the controller to match the full range of its travel to the full range
of the Destination parameter. To customize your patches, the MPX G2 provides
a full set of additional controls. Each of these is described in the following
sections.
the < and > buttons to select the Source
In this example, the Source assignment
A/B
field is selected. The knob will scroll through
all of the available Source selections.
A/B
With the Destination assignment field
selected, the knob will scroll through
all of the parameters of the currently
loaded program.
Lexicon