1-Band (D) And 2-Band (D); Fc Splitter - Lexicon MPX G2 User Manual

1-Band (D) and 2-Band (D)

Mix 0-100%
Level Off, -89 to +6dB
G-L, G-L1, G-L2 -72 to +24dB
Fc-L, Fc-L1, Fc-L2 20-20000Hz
Q-L, Q-L1, Q-L2 0.1-10.0
M-L, M-L1, M-L2 LShlf, Band, HShlf
G-R, G-R1, G-R2 -72 to +24dB
Fc-R, Fc-R1, Fc-R2 20-20000Hz
Q-R, Q-R1, Q-R2 0.1-10.0
M-R, M-R1, M-R2 LShlf, Band, HShlf

Fc Splitter

Mix 0-100%
Level* Off, -89 to +6dB
LoCut 100-10000Hz
HiCut 100-10000Hz
Bal* -50 to +50
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Boost/cut gain of left filter(s)
Center or corner frequency of left filter(s)
Q of left filter(s)
Determines EQ type(s)
Boost/cut gain of right filter(s)
Center or corner frequency of right filter(s)
Q of right filter(s)
Determines EQ type(s)
Dry/Wet ratio
Amount of effect in the processed signal
Corner frequency for the low cut (highpass)band
Corner frequency for the high cut (lowpass) band
Relative level of the low and high band
The Effects and Parameters
1-Band (D) has two bands of
double-precision parametric EQ,
one on each channel. 2-Band (D)
has four bands of double-preci-
sion parametric EQ, two on each
channel.
Center frequency, Q, boost/cut
and filter type (low shelf, band,
high shelf) are adjustable.
68
1-Band (D)
109
2-Band (D)
The Fc Splitter effect splits a
mono input into a low-passed out-
put on the left channel and a high-
passed output on the right, with
independent control of the corner
frequencies of both filters. If the
corner frequencies are the same,
and the balance is set to 0, the
frequency response will be flat
when the two outputs are summed.
Bal controls the relative level of left
and right outputs. When Bal=0, the
left and right outputs are not at-
tenuated. Negative values attenu-
ate the right output (highs). Posi-
tive values attenuate the left (lows).
55
190
190
190
7-41