Sweepfilter; 1-Band (M) - Lexicon MPX G2 User Manual

SweepFilter

Mix 0-100%
Level* Off, -89 to +6dB
Fc* 20-20000Hz
FRes* 1-100
Mod* 20-20000Hz
Scale* -100 to +100%
Pan* 50L to C to 50R

1-Band (M)

Mix 0-100%
Level Off, -89 to +6dB
Gain -72 to +24dB
Fc 20-20000Hz
Q 0.1-10.0
Mode LShlf, Band, HShlf
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Corner frequency offset of filter
Filter resonance: 7=a maximally flat filter
added to corner frequency offset to produce corner frequency
scales Mod
Left/right pan control
Dry/Wet ratio
Amount of effect in the processed signal
Boost/cut gain of filter
Center or corner frequency of filter
Q of filter
Determines EQ type
The Effects and Parameters
SweepFilter simulates a Moog-
type resonant low-pass filter. Cut-
off frequency and output level are
interpolated, and can be swept.
The performance of this filter is
high enough that it can be used as
a lowpass filter for hiss reduction.
The parameters were de-
signed to allow synthesizer-like
control of the filter. For example:
Use FC like the manual "cutoff"
knob of an analog synth – set it to
the filter frequency desired when
all modulation sources are at mini-
mum.
Use Mod as the patch destina-
tion for as many as five modulation
sources (LFO, Rand, Env,
LastNote, etc.).
Use Scale as a master depth
control for all modulation sources.
92
The 1-Band (M) effect provides
a single band of double-precision
parametric EQ with adjustable cen-
ter frequency, Q, boost/cut and
filter type (low shelf, band, high
shelf).
50
190
190
7-17