Specifications - Lexicon MPX G2 User Manual

I/O
Instrument input:
Levels:
Return Inputs:
Levels:
Main L and R Outputs:
Nominal Level:
Maximum Output Level:
Send Output:
Nominal Level:
Maximum Output Level:
Audio performance
Frequency response:
THD+N:
Dynamic Range:
Sample rate:
Return Mix:
Throughput delay
without send/return loop:
mono 1/4 inch 1meg unbalanced, with analog soft clipping circuit and front
panel input level control
minimum +2.2dBu for full scale, maximum +10dBu max
A/D: 24-bit
stereo, 1/4 inch, 50k unbalanced, with analog soft clipping circuit and
ganged level control on rear panel
minimum –10dBu for full scale
maximum +18dBu max (for +4 nominal inputs)
+18 dBu with rear level pot at minimum
A/D: 24-bit
1/4 inch TRS balanced (2), XLR 3-wire balanced (2)
front panel adjustable to +4dBu
balanced: +18dBu into 600
unbalanced: +21dBu into 100k
D/A: 24-bit
mono, 1/4 inch unbalanced
software adjustable to +4dBu
+18dBu into 100k
D/A: 24-bit
20Hz to 20kHz;
+1 to -1.5dB for input to send
+1 to -1.5dB for return to output
<0.01%, at 1kHz nominal output level
.01% at 1kHz insert returns to main output
.01% at 1kHz input to main outputs
Instrument input to send:
-110dB (unweighted) minimum Input to Send with Relay Bypass on
-120dB (unweighted) Input to Send with Noise Gate on
-97dB (unweighted) typical instrument to main outputs in Bypass
44.1kHz
When the Return Mix option is selected, MPX G2 will mix the analog Aux
inputs with the post converter output signal from the DSP.
Input to Main Output <3ms, nominal

Specifications

11
MPX G2
Specifications
11-1