Copying Patches; Midi Learn - Automatic Controller Assignment - Lexicon MPX G2 User Manual

MPX G2 User Guide
MIDI Learn — Automatic
Controller Assignment

Copying Patches

With Dst selected on the Source
and Destination assignment
screen, press Options to copy any
other patch into the current patch.
Your selection will take effect im-
mediately when you exit by press-
ing Options again.
4-4
You can have the MPX G2 automatically recognize a MIDI controller as a patch
Source, as well as assigning its MIDI Receive channel to match any controller
with the MIDI Learn function.
From the Source Activity screen, press > to access the MIDI Learn screen. With
this screen displayed, simply move any active MIDI controller to automatically
assign it as the Source for the current patch. The MPX G2 will also recognize the
MIDI channel of the controller and reset to that channel for receipt of all incoming
MIDI messages.
From the Source Activity screen, press > to
access MIDI Learn.
Source Val: 0
< > Peak: 0
Press < to return to the
Source Activity screen.
From the MIDI Learn screen, press < repeatedly to step back through the Patch
Source Options. Press Options to return to the Source and Destination
assignment screen.
From the Source and Destination assigmment screen, selecting Dst and
pressing Options will allow you to copy any other patch to the patch you are
working on. With the following screen displayed, use the knob to select patch 1-
5, or — to leave the current patch unchanged.
Dst:
In this example, – indicates no patch information is to be copied.
Other selections (1-5) will automatically copy information from the
indicated patch to the current patch when you exit Options.
Src: MIDI learn
< CC1
Simply move any attached MIDI controller to have the
MPX G2 recognize it as the patch Source and switch
to its MIDI channel. This example shows the result of
moving a Mod Wheel (CC1) on a connected MIDI
device transmitting on Channel 1.
Copy patch
– –
Lexicon
Ch: 1