Changing The Range Of The Source Controller; Viewing Source Controller Activity - Lexicon MPX G2 User Manual

With Src selected, pressing Options will allow you to specify range limits for the
controller you have selected. With the following screen displayed, use the < and
> buttons to select the Min, Mid or Max field, and the knob to set the value from
0-127. The default settings of Min=0 and Max=127, cause the parameter to be
controlled linearly by the controller. Reversing these values (Min=127 and
Max=0) will establish inverse control over the parameter. Adding a Mid value
allows you to put a pivot point in the patch. All patches have default settings of
Min=0, Max=127, with no Mid values assigned.
In this example, the underscore indicates that the
Min value field is selected. The knob will select
values from 0-127. Press > once to select the Mid
field, once again to select the Max field.
From the Src Value screen pressing the > button beyond the Max value field
selects a reference screen where you can view the actual behavior of the
controller you've selected.
With the Max value field selected, pressing > will
forward you to the Source Activity screen.
Src: Min
> 0
Press < to return to the
Source Value screen.
The Source Activity screen displays the actual activity of the controller you have
designated as the Patch Source. Moving the controller will allow you to view the
actual controller value in real time (Val). The peak controller value is referenced
on the lower line (Peak). This lets you quickly determine the most useful range
settings for the controller.
For example, if you have selected Input Level as the Source, and you notice from
the Activity screen that the actual level never rises above 100, you can quickly
back up to the Src Value screen ( press < once) and set the Max value to 100.
Src: Min Mid Max
> 0 - - -
Mid Max
- - - 127
Source Val: 0
< >
The Source Activity screen lets you reference actual
controller values to help you determine the most
useful range.
127
Peak: 0
Patching
Changing the Range of
the Source Controller
With Src selected, press Options
to set range limits for the controller
you have selected. Press Options
again to return to the Patch Source
and Destination assignment
screen.
Viewing Source
Controller Activity
4-3