Gate - Lexicon MPX G2 User Manual

Gate

Mix 0-100%
Level Off, -89 to +6dB
Time 140-700ms
Link Off, On
Diff 0-100%
P Dly 0-250ms
LoSlp -16 to +16
HiSlp -16 to +16
Xover 30Hz to 24.7kHz, Full
Rt HC 525Hz-24.7kHz, Flat
Shape 0-255
Spred 0-255
* = Interpolated; ( ) = Option of preceding parameter
Dry/Wet ratio
Amount of effect in the processed signal
Reverb time for mid and low frequency signals
Scales Spred with Size
Increase of initial echo density over time
Delay inserted before the onset of reverberation
Determines low frequency envelope shape
Determines mid and high frequency envelope shape
Frequency of transition from LoSlp to Slope
High frequency content of Slope
Contour of the reverberation envelope
Sustain of reverberation after initial build up
The Effects and Parameters
Gate is a reverb effect with a
fairly constant sound and no de-
cay until the reverb is cut off
abruptly. This effect works well on
percussion — particularly on snare
and toms, but be sure to experi-
ment with other sound sources as
well.
The Mix, P Dly and Rt HC pa-
rameters are very important in this
effect, allowing you to create any-
thing from an enhancement or
subtle thickening, to a solid wall of
reverb.
0
NO PROCESSING STEPS USED
190
7-37