Ctl Send/Options: Midi Reset; Ctl Smooth; Clock Send - Lexicon MPX G2 User Manual

Lexicon guitar effects processor user guide mpx g2
Hide thumbs Also See for MPX G2:
Table of Contents

Advertisement

MPX G2 User Guide
Ctl Send
Ctl Send Selections
None
ABTrg
Off
Pedal
On
Tog 1-3
Knob
Sw 1-3
Puls1
CC 1-31
Tri1
CC33-119
Sine1
Bend
Cos1
Touch
Puls2
Vel
Tri2
Last Note
Sine2
Low Note
Cos2
High Note
Rand
Tempo
Env
Cmnds
InLvl
Gate
RnLvl
Trig
A/B
LGate
ATrg
TSW
BTrg
Toe
Press Options to
access MIDI Reset.
Press Yes in response to
the display prompt to reset all
patched parameters to their
stored values. Press Options
again to return to the MIDI Ctl
Send menu.

Ctl Smooth

Clock Send

5-8
If Transmit is active (set to any channel), you can select any of the controllers
shown to the side to transmit MIDI controller messages if they are used in a
patch.
The display presents two selection fields for mapping the controllers as shown
below.
MIDI Ctl Send
< >
Options: MIDI Reset
The MPX G2 recognizes the "Reset All Controllers" MIDI message. When
received, all patched parameters are reset to their stored values. Patched
parameters may also be reset from the MPX G2 front panel —in System mode
select Ctl Send from the MIDI menu and press Options, then press Yes. (The
message will be transmitted from the MPX G2 as well). If you do not want to
perform the reset, press Options to exit.
The Ctl Smooth parameter is an intelligent filter that provides a smoothing
function for incoming MIDI data. At 100, the filter is essentially bypassed. With
decreasing values, the filter becomes more sluggish in its response to small MIDI
controller value changes while maintaining a fast response to large changes.
This is useful for smoothly interpolating sparse MIDI controller data. As the value
is lowered, the filter's response slows for both large and small MIDI controller
value changes.
You can choose to have the MPX G2 transmit MIDI Clock at the current tempo
rate by setting this control to On and Tempo Source (in the Edit menu) to
Internal. If this control is set to Off, MIDI Clock will not be transmitted.
Knob= CC78
Two fields are available for mapping
MPX G2 controls to MIDI controllers.
Lexicon

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents