Editing; Effect Editing - Lexicon MPX G2 User Manual

This chapter describes all of the MPX G2 edit functions. As the first thing you are
likely to want to modify in a program are its effects, this section starts there and
then moves on to all of the functions available in Edit mode.
To edit any effect, press Edit, then press an Effect button to view all of the Effects
of that type, and to edit the parameters of the current Effect. The display will show
the Effect type and the name of the currently loaded Effect . Turn the knob to view
other Effects of the displayed type.
This indicator shows that
Options are available
FX 1
>
Arrow scroll
The Effect name will be marked with an asterisk ( ) and the Effect button light
will blink rapidly if the displayed effect can be loaded in the current program.
(Press and hold the Effect button to display the name of the Effect currently in
use.)
An X appears in place of the asterisk if there are not enough DSP resources to
load the effect. Two seconds after an algorithm is selected with the knob, the
following screen will appear briefly, showing the number of resources available:
Number of processing
steps used (including the
currently running effect)
Knob scroll
select: nn
Effect Name
number of processing
steps remaining
nn available
XXX of 190 used

Editing

Effect Editing

Number of processing
steps used for this effect
Editing
3
3-1