Copy Programs - Lexicon MPX G2 User Manual

MPX G2 User Guide

Copy Programs

5-14
The Store button LED will flash, indicating that the MPX G2 is armed to perform
the clear procedure. Press Yes to execute the clear operation. Note that this will
override the Memory Protect function if it is on.
A displayed message indicates that the clear operation is complete. Press
System to return to the main System menu.
Note that if you clear the active program, you can still use it and make
modifications to it (including restoring it) until you load another program, at which
time the clear action will take effect.
This control allows you to copy a single program, or any number of consecutively
numbered programs into a new location in User memory (program #s 251-300).
Selections you make here will overwrite programs currently at the location(s) you
designate.
From the Copy Programs screen, press > to display the following screen.
Copy 251 to 300
Starting at:
Select the location where you want the first of your selected
programs to be placed. The remainder of the programs you
have selected will be placed consecutively after this point.
The Store button will flash. Pressing it
will display the following message ...
Are you sure?
Yes or No
The Store button LED will flash, indicating that the MPX G2 is armed to perform
the copy procedure. Press Yes to execute the copy operation. Note that this will
override the Memory Protect function if it is on.
A displayed message indicates that the copy operation is complete. Press
System to return to the main System menu.
Two fields are available for selecting
any number of programs between 1 and
300.
251
Press Yes to copy the desig-
nated programs into the se-
lected location. Press No to
cancel the operation.
Lexicon